SMA DATA MANAGER M - Creating and Importing a Backup File

8 Operation
SMA Solar Technology AG
Operating manualEDMM-10-BE-en-2754
Procedure:
1. Log into the user interface of the DataManager.
2. Select the menu item Device administration in the menu Configuration.
3. Select the button.
4. Select EEBUS devices and confirm with [Next].
5. Fill out the input fields and confirm with [Next].
6. Note down the SKI device ID and start the search with [Start search now].
☑ Available EEBUS devices in the system are searched for and displayed.
7. Enter a device name for the EEBUS device found and select [Next].
8. To complete the configuration, perform the coupling on the EEBUS device (see manufacturer's
manual). To do this, keep the SKI device identifier of the product ready.
☑ The connected EEBUS device is displayed on the dashboard.
8.11 Creating and importing a backup file
As soon as the product and all devices are in operation and your system is optimally configured,
SMA Solar Technology AG recommends creating a backup file. If you replace your product or
reset your existing product to the default settings, the backup file can be used to transfer
configuration information. The backup file includes the following system and device configuration
data for your product:
• Grid management services
• FTP
• Network
• Sensors
• Analog and digital inputs
• Analog and digital outputs
• Energy meter
• SunnyPortal setting
• Self-defined Modbus profiles
• System password
• User interface login data
• List of connected devices
Note that the following information is not included in the backup file:
• Notifications
• Historic energy and performance values
• Configuration of individual inverters
Creating a backup file
Procedure:
1. Log into the user interface of the DataManager.
2. Select the Data Manager.