Dimensions for mounting:
638 mm
432 mm
216 mm 216 mm
20 mm 11 mm
79 mm Ø 11 mm
112 mm
105 mm
110 mm
86 mm
130 mm 86 mm
467 mm
619 mm
40 mm
130 mm
648 mm
507 mm
Figure 4: Position of the anchoring points
Recommended clearances:
If you maintain the recommended clearances, adequate heat dissipation will be ensured. Thus, you
will prevent power reduction due to excessive temperature.
☐ Maintain the recommended clearances to walls as well as to other inverters or objects.
☐ If multiple inverters are mounted in areas with high ambient temperatures, increase the
clearances between the inverters and ensure sufficient fresh-air supply.
5 Mounting
SMA Solar Technology AG
Operating Manual 17STP15-25TL-30-BE-en-13
To Next Page
Loading...
