5. Insert screw anchors into the drill holes if the support surface requires them.
6. Secure the wall mounting bracket horizontally using screws and washers.
7. Hook the inverter into the wall mounting bracket.
8. If the inverter has been transported with a crane, remove the eye bolts from the threads on the
top of the inverter and reinsert the filler plugs.
9. Remove all six screws from the lower enclosure
lid using an Allen key (AF 3).
10. Flip the lower enclosure lid up and remove it.
11. In order to secure the inverter from being lifted
off the wall accidentally, attach it to the wall with
suitable mounting material. Use both of the
lower drill holes on the rear panel of the inverter.
12. Ensure that the inverter is securely in place.
5 Mounting
SMA Solar Technology AG
Operating ManualSTP15-25TL-30-BE-en-1320
To Next Page
Loading...
