30
H
Wechselrichter in Betrieb nehmen | Commissioning the Inverter | Θέση σε λειτουργία του μετατροπέα |
Puesta en marcha del inversor | Mise en service de l’onduleur | Messa in servizio dell’inverter | Uvedení
střídače do provozu | Idriftsættelse af omformeren | Omvormer in bedrijf stellen| Uruchamianie falownika |
Colocar o inversor em funcionamento | Az inverter üzembe helyezése
* ESS = optional
I
System-Daten | System-Data | Στοιχεία συστήματος | Datos del sistema | Données du système| Dati del
sistema | Systémové údaje | System-data | Systeemgegevens | Dane techniczne | Dados do sistema |
Rendszeradatok
Topology transformerless
Overvoltage category in accordance with IEC 60664-1 II (DC), III (AC)
Protection class in accordance with IEC 61140 I
All-pole sensitive residual-current monitoring unit integrated
Maximum permissible value for relative humidity, non-condensing 100 %
Extended humidity range according to IEC 60721-3-4 0 % to 100 %
Pollution degree inside the enclosure 2
Pollution degree outside the enclosure 3
Local requirements
NRS 97-2-1: This standard requires a separate
label attached to the AC distribution board, which
indicates the AC-side disconnection of the inverter
in case of a grid failure (for further details, see
NRS 97-2-1, Sect. 4.2.7.1 and 4.2.7.2)
To Next Page
Loading...
