8 Operation
SMA Solar Technology AG
Operating manualSTP8-10-3AV-40-BE-en-1268
5. Select [Browse] and select the update file for the inverter.
6. Select Update firmware.
7. Follow the instructions in the dialog.
Search and install the firmware via the user interface of the inverter.
Requirements:
☐ The inverter must be connected to the Internet.
Procedure:
1. Open the user interface (see Section8.1, page49).
2. Log into the user interface as an Installer (see Section8.2, page53).
3. Click on [Edit parameters].
4. Go to Device > Update.
5. Select the parameter Check for update and install it and set it to Execute.
6. Click on [Save all].
☑ The firmware is updated in the background.
To Next Page
Loading...
