IV. OPERATING YOUR WINE COOLER
Initial Setup
Remove exterior and interior packing materials and connect the wine cooler to a power
supply. Once it is plugged in, let it run for at least 30 minutes. Do not change the
temperature or adjust any settings at this time.
Temperature Adjustment
Your wine cooler can be set to your desired temperature. The unit’s temperature range is
4°C to 18°C (39°F to 65°F).
Avoid setting the thermostat too high or the wine cooler may be unable to achieve
satisfactory cooling temperatures. The temperature scale runs from 1, the warmest setting,
to 7, the coldest. The 0 position is an OFF setting which can be used when the wine cooler
is standing empty. When storing wines in the wine cooler, keep them away from the rear
wall. To allow free circulation of cold air don’t pack wines too tightly on the shelves and
never put hot food in the wine cooler.
CHANGING THE REVERSIBLE DOOR
This appliance is designed with a reversible door feature. You have the option of
configuring the door to open/close either from the left or the right side. In order to reverse
the opening direction of your door, please follow these simple instructions.
To Next Page
Loading...