V. OPTIMIZING PERFORMANCE
To ensure maximum performance and efficiency, be sure to place your wine cooler
in an area where there is proper air circulation. Also make sure the plumbing and
electrical connections are correct.
Allow for proper clearance around the wine cooler. Below are the recommended
clearances:
Sides: 3/4" (19 mm)
Top: 4” (100 mm)
Back: 2” (50 mm)
For proper internal air circulation, do not overfill your wine cooler.
Do not place the unit in direct sunlight.
Do not place heated wines in your wine cooler.
Do not store perishable food in your wine cooler. The unit’s interior temperature may
not be low enough to prevent spoilage.
Do not place heavy objects on top of the wine cooler.
VI. MAINTENANCE
Shut off the power supply before cleaning the unit’s cabinet.
Remove all wines and storage shelves.
Clean the unit’s interior with a warm water and neutral detergent solution.
Thoroughly dry all surfaces.
Please Note:
a. Do not use abrasive cleaners to clean the wine cooler.
b. Use mild, soapy water to clean the unit’s door seal.
c. To ensure efficient operation, also thoroughly clean the back and bottom of the
wine cooler.
To Next Page
Loading...
