Smart Openers SMART ROLLER DUO User Manual

smart
o
p
eners
WARNING: IT IS VITAL FOR THE SAFETY OF ALL
PERSONS INSTALLING AND USING THIS OPENER TO
FOLLOW THE INSTALLATION INSTRUCTIONS AND
SAFETY WARNINGS. FAILURE TO COMPLY MAY RESULT
IN SERIOUS PERSONAL INJURY AND/OR PROPERTY
DAMAGE AND FAILURE OF THE OPENER SYSTEM.
INSTALLATION
MANUAL
SMART ROLLER DU
ROLL UP DOOR OPENER
duo

Smart Openers SMART ROLLER DUO Specifications

General

Brand	Smart Openers
Model	SMART ROLLER DUO
Category	Garage Door Opener
Language	English

Summary

General Safety Warnings

Installation Safety Precautions

Critical safety guidelines for installers and users, covering compliance and risks.

Product Description

Features and Operation Overview

Overview of the Smart Roller Duo opener's features, power, and operational modes.

Operating Controls Overview

Control Board Components

Visual representation of the main circuit board with labeled components and terminals.

Control Functions and Inputs

Detailed explanation of the operate button, limit switches, cords, and input terminals.

Pre-Installation Requirements

Installation Preparation Checklist

Essential checks before installation, including reading instructions, power, and wiring.

Site and Risk Assessment

Evaluating surrounding hazards, voltage compatibility, and electrical protection.

Safety Device Recommendations

Emphasis on installing safety devices like photo electric beams for enhanced safety.

Motor Wiring Verification

Verifying correct motor wire connections (red-red, green-yellow) before proceeding.

Installation Site and Door Preparation

Space, Weight Bar, and Curtain Fixing

Requirements for sideroom, weight bar placement, and securing the door curtain to the drum.

Handed Installation Setup

Instructions for setting the dip-switch for left or right-hand door installation.

Fitting Drive Unit to Door

Right Hand Side Installation Steps

Step-by-step guide for fitting the drive unit to the door shaft for right-hand installation.

Setting Travel Limits

Right Hand Limit Setup

Adjusting upper and lower limit cams for desired RH door travel.

Left Hand Limit Setup

Adjusting upper and lower limit cams for desired LH door travel.

Open Limit Fine-Tuning

Adjusting the UP LIMIT CAM for the correct open position.

Close Limit Fine-Tuning

Adjusting the DOWN LIMIT CAM for the correct close position.

Obstruction Force Margins

Setting Close Obstruction Force

Adjusting the down force to ensure the door reverses on obstruction.

Close Safety Obstruction Test

Testing the door's response to obstructions for safety compliance.

Transmitter Coding

Programming and Deleting Remotes

Procedures for adding new transmitters and removing all stored codes.

Routine Maintenance

Maintenance Schedule and Checks

Guidelines for maintaining the opener's performance and safety devices.

Technical Specifications

Product Details and Ratings

Key technical data including power input, motor, temperature, and storage.

Manual Operation and User Information

Manual Disengagement Procedure

How to use the red and green cords to switch between automatic and manual modes.

User Guidance and Safety

Information for the end-user on safe operation and maintenance responsibilities.

Warranty and Liability

Warranty Coverage and Exclusions

Details on warranty terms, conditions, and common causes for exclusion.