Need help?Do you have a question about the Smart Sensor AR882+ and is the answer not in the manual?
General| Resolution | 0.1°C/0.1°F |
|---|---|
| Response Time | 500 ms |
| Distance to Spot Ratio | 12:1 |
| Laser Pointer | Yes |
| Data Hold | Yes |
| Backlight | Yes |
| Auto Power Off | Yes |
| Power Supply | 9V battery |
| Display | LCD |
| Accuracy | ±1.5% or ±1.5°C |
| Emissivity | Adjustable 0.1~1.0 |
| Spectral Response | 8 to 14 µm |
| Dimensions | 153 x 101 x 43 mm |
| Temperature Range | -50°C to 550°C (-58°F to 1022°F) |
How to point the thermometer and how distance affects the measuring area spot size.
Controls the laser pointer and backlight, which stay on for 10 seconds.
Explains the functions of keys for modes like MAX, MIN, AVG, DIF, HAL, LAL, SGN, PLY, CLR.
Details on how to store, recall, and clear measurement data.
Enables continuous measuring by locking the trigger.
Description of LCD display elements and battery replacement.
Ensures the target is larger than the spot size for accurate measurements.
Explains emissivity of materials and how to measure shiny surfaces accurately.
Instructions for software installation and features like data store and curve graphs.
Explanation of the various icons and indicators on the LCD screen.
Guidance on how to scan across an area to locate target spots.
Details about the trigger, software version display, and auto power off.
To Next Page
