Smart Start Interlocks SSI 20-20 - Random Rolling Retest Diagram

To Next Page

To Previous Page

Time in Minutes

RANDOM ROLLING RETEST

DIAGRAM

• Unit parameters have been set by VicRoads and require random rolling retests. The first test will

occur within the first 5 to 15 minutes and then randomly over every consecutive hour aer initial

test.

• The Device will indicate that it is time to submit a Rolling Retest when the screen displays ‘RE-

TEST’ with the LED lights flashing and the Device beeper sounding.

• You have 5 minutes to safely provide a breath sample test. The road rules state that you must find

a safe place and pull over.

• Drink Water.

• Provide a breath sample.

• Once a Pass breath sample has been provided you can continue driving.

Please note, when you have arrived at your destination, check the Device screen. If it is

requesting a test you must provide the test before turning the vehicle OFF. Failure to

provide a test is a violation and will put the Device into a Violation Countdown.