11
3. Use of the Interlock
3.1 Start-up Procedure
1. Turn the car on. The interlock will activate, and the
screen will display INITIALISING.
2. When the interlock is ready, the screen will display BLOW.
3. After a successful completion of the test, the interlock
analyses the breath sample, and the screen will display
ANALYSING.
The display will then show one of the following test results:
Following PASS, the interlock will show START
3:00. You may now start the vehicle
You have blown alcohol into the interlock and
you are close to the pre-set limit. You are able
to start your vehicle; however, your alcohol
level may continue to rise, and you may be at
risk of blowing a violation on a random re-test.
We advise you NOT to drive your vehicle until you are
sure you have NO alcohol in your system.
A VIOLATION occurs when the alcohol detected
in your breath sample is above 0.020 BAC. The
interlock will go into a 5-minute lockout and you
will need to take the test again.
One of several ABORT messages: Abort means
that you need to adjust the way that you're
taking the test.
To Next Page
Loading...
