5
This thermostat is designed to work on the following
heating and cooling systems:
Gas – Standing Pilot
Gas – Electronic Ignition
Gas – Fired Boilers
Gas – Milivolt Systems
Gas Heat with Add on Cooling
Single Stage Heat Pump - No auxilary
This thermostat is not designed for multi-stage
systems or mains 240V AC Switching.
If 240V Switching is required an optional
Smartpak-03 interface is required. Please contact
your place of purchase or Smart Temp.
If you are unsure what kind of heating and cooling
system you have, please contact a qualied HVAC
Technician for assistance.
IMPORTANT INFORMATION
To Next Page
Loading...
