Please send the SMS command below:
APN command format: APN,APN’s Name#
e.g: APN,internet#(“internet” is the APN of carrier) the device will reply ”OK” if
setting successfully.
Note:The APN of some countries have user name and password, you may
need to send SMS command as following:
APN command format: APN,APN’s Name,user name,password#
e.g:APN,internet,CLIENTE,AMENA#
It will reply “OK” after set successfully.
6.2 DNS setting
To connect other platform, please send the two SMS commands below:
Command format:
In DNS way: ①APN,APN’s Name#
②SERVER,1,DNS,Port,0#
Or in IP Way: ①APN,APN’s Name#
②SERVER,0,IP,port,0#
e.g.:
In DNS way: ①APN,internet#
②SERVER,1,www.cooaccess.net,8841,0#
Or in IP Way: ①APN,internet#
②SERVER,0,59.188.23.235,8841,0#
It will reply “OK” after set successfully. Then the device will be connected to
other platform.
6.3 ON /OFF GPRS
When you want to disable GPRS, you can sms command to the sim card
number which used in the device.
Command format:
GPRS ON: GPRSON,1#
GPRS OFF: GPRSON,0#
It will reply “OK” after set successfully.
6.4 Add specific number
SMS command to the device to set the SOS number.
SOS,A,No.1,No.2,No.3#
“A” means to add new numbers, for example:
SOS,A,13510905991,13510905992,13510905993#
If there is only one SOS number, you can appoint a specific number as SOS
number. And the null means no adding.
To Next Page
Loading...