What to do if Smart Tracker GT06 function is normal but cannot locate for a long time?
If the GPS function of your Smart Tracker device is working, but it cannot locate for an extended period, ensure that the GPS antenna face is oriented upwards and confirm that there are no objects above the device that could absorb electromagnetic waves.
Why is my Smart Tracker GT06 in offline status on the platform?
If your Smart Tracker GPS device shows as 'offline' on the platform, there are several things you can check: * Examine the status of the three LEDs. * Try calling the device's SIM card number to see if the call connects. * Make sure the vehicle isn't in an area without GSM coverage. * Verify the device isn't in a GSM/GPS disconnection area. * Confirm that your SIM card has sufficient credit and supports GPRS. * Review the parameter settings.
Why does my cellphone receive tele-cutoff alarm SMS from Smart Tracker GPS?
If your cellphone with a special number receives a tele-cutoff alarm SMS from your Smart Tracker GPS, verify whether there's an illegal wire cutoff and check if the fuse on the power line is blown. If necessary, contact your distributor to exchange it with the same model fuse.
What to do if Smart Tracker GPS GSM cannot receive signals normally?
If your Smart Tracker GPS cannot receive GSM signals normally, check whether the SIM card is installed correctly and drive to a place covered by GSM signal reception.
How to fix Smart Tracker GT06 that cannot receive signals due to high buildings?
General| GPS Accuracy | 5m |
|---|---|
| Network | GSM/GPRS |
| Operating Temperature | -20°C to +55°C |
| GSM Frequency | 850/900/1800/1900 MHz |
| GPS Sensitivity | -159dBm |
| Storage Temperature | -40°C to +85°C |
| SOS Button | Yes |
| Geo-Fence | Yes |
| Waterproof Rating | IP65 |
| Battery | Li-ion |
| Time To First Fix | 1s (hot) |
| Standby Current | 5mA |
| Humidity | 5% to 95% (non-condensing) |
Recommendations for covert installation, placement, and fixing the device.
Instructions for setting the APN to connect the device to the platform.
Details commands for setting DNS or IP addresses to connect to a platform.
Instructions to set a center number authorized to send control commands.
SMS commands ('POSITION', 'WHERE#', 'URL#') to get the device's location.
Procedure for cutting off vehicle fuel supply through the tracking platform.
SMS command to cut off vehicle fuel supply, requiring center number authorization.
How to restore the vehicle's fuel supply using the tracking platform.
SMS command to restore the vehicle's fuel supply, sent by the center number.
Steps to troubleshoot why the device is not connecting to the platform server.
To Next Page
