SMART 3000 - Operating Procedures; Recover Refrigerant

To Next Page

To Previous Page

ENGLISH

 SMART 3000 unit & tablet

 Low-side and high-side services hoses and quick-action coupler valves

 Oil filler cap

 Power cable

 Operating manual and warranty

Before the first use:

1. Place the unit on a level surface.

2. Connect quick-action coupler valves to the service hoses (DO NOT OVERTIGHTEN).

3. Remove aluminum foil from the vacuum pump and

install oil filler cap.

4. Remove fixing bolt located under the unit.

5. Plug the power cable into a grounded power outlet.

6. Turn on the power switch.

7. Turn on the tablet.

8. Perform a vacuum calibration (page 40).

Operations

Recover Refrigerant