38
Scale Calibration
WARNING: Scale calibration must not be performed unless it is absolutely necesssary. If
scale is no longer measuring accurately, please call technical service.
1. Press SERVICE then CALIBRATIONS.
2. Select SCALE CALIBRATION.
3. Wait.
4. Display will read PLACE TEST WEIGHT.
5. Place test weight on the storage tank.
6. If necessary, use keypad to change the value to match with the weight used (default
is 2000 grams).
7. Press OKAY.
8. Wait.
9. Display will read COMPLETED.
Scale Zeroing
WARNING: Scale zeroing must not be performed unless it is absolutely necesssary. If scale
is no longer measuring accurately, please call technical service.
1. Storage tank must be empty.
2. Press SERVICE then CALIBRATIONS.
To Next Page
Loading...