10!24 Helpful hints
Tyres and wheels
! Fit the wheel in place and tighten the
bolts handtight using the wheel
wrench.
! Lower the car and remove the jack from
under it.
! Tighten the wheel bolts firmly using
the wheel wrench (tightening torque:
120 Nm).
>Note!
If the newly mounted wheels exhibit any
imbalance, have this checked and
rectified by a qualified specialist
workshop, e.g. a smart center.
Accident risk!
Have the tightening torque
checked immediately after changing a
wheel. The wheels could otherwise work
loose if they are not tightened to a
torque of 120 Nm.
!"#$%&'()*$#+,,-#.#/01,,2034567(809:;<%%=##>*7)*#-C##@%4)&5A#-1;#B=)%<*$#-,,C##??DC?#??
To Next Page
Loading...
