smart4u SH50 - General Safety and Accident Preparedness; Troubleshooting Electronic Functions

14
This Helmet meets the requirement of EN 1078:2012+A1:2012 and comply with the essential health and safety
requirements of Regulation (EU) 2016/425 on Personal Protective Equipment and the above referenced standards
EC approval conducted by : ITS Testing Services(UK) Ltd., Centre Court, Meridian Business Park, Leicester LE19 1WD
No.0362
a)The helmet can only protect if it ts well and that the buyer should try dierent sizes and choose the size which
feels secure and comfortable on the head;
b)The helmet should be adjusted to t the user, e.g. the straps positioned so that they do not cover the ears, the
buckle positioned away from the jawbone and the straps and buckle adjusted to be both comfortable and rm;
c)The helmet should be positioned on the head to ensure the intended protection is provided (e.g. that it should be
placed so as to protect the forehead and not be pushed too far over the back of the head);
d)A helmet cannot always protect against injury;
e)A helmet subjected to a severe impact should be discarded and destroyed;
f)Do not modify or remove any of the original component parts of the helmet other than as recommended by the
manufacturer. Helmets should not be adapted for the purpose of tting accessories in a way not recommended by
the manufacturer.
Battery life : about. 26-36hrs for lighting all the time
Electricity parameter : DC 5V 1A
Temperature : Temperature for use: 0°C~40°C
Waterproof class : IPX4
Charging time : Approximately 3 hours
Charging port : Magnetic USB
Battery : 3.7V/455mAh
V. Technical Specications
Performance standards:
USA: CPSC1203:1998, FCC Part 15 Rules
STANDARD(S): EN 55014-1:2017 EN 55014-2:2015