3
Brainfingers Hardware
The hardware consists of:
• Brainngers headband
• Amplier
• USB Cable
The headband is made up of 6 sensors, they have a shiny side which faces
out and the dull grey side which presses against the forehead. The thick
wire needs to run down the left hand side of the head and the headband is
adjustable by using the clamp on the thick wire for large adjustment and the
cord with the cord stop for the ne adjustment.
Brainfingers Software – Quick Start
Launch the Brainngers Access software. The rst screen will ask you to
choose a prole or you can add a name for a new prole.
To Next Page
Loading...