EasyManua.ls Logo

Smartech JSL-950 - Device Functions; Flashlight and USB Power Usage; 12 V DC Power Output

Smartech JSL-950
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
USER’S MANUAL PAGE 8JSL-950
10. After the engine starts, immediately turn the switch to the OFF position
and remove the unit from the battery.
FLASHLIGHT
USB POWER
SUPPLY TO 12V DEVICES
ESTIMATED RUN-TIMES
Press Flashlight + USB On/Off button upwards and the light will illuminate.
Plug the electronic device into one of the two USB ports on the front panel.
Press Flashlight + USB On/Off button downwards to start USB power.
This unit is a power source for all 12V DC devices that are equipped with a
12V accessory plug. Plug the device into the 12V DC power outlet on the
front panel. Turn on Jump start + 12V DC power switch to start 12V power,
and turn the 12V DC device on (if required).
CAUTION: Do NOT use the Portable Power to run appliances that draw
more than 15A DC. Extended operation of a 12V DC device may result in
excessive battery drain.
SUPPLY 12V
DEVICES
ESTIMATED
WATTAGE
ESTIMATED
RUN TIME
Cellular phones,
Fluorescent lights
4 watts 36 hrs
Radios, Fans,
Depth nders
9 watts 16 hrs
Camcorders, DVD
players, Spotlights
15 watts 9.6 hrs
Electrical tools, Bilge
pumps
24 watts 6 hrs

Related product manuals