USER’S MANUAL PAGE 9JSL-950
NOTE: Actual time may vary. Times are based on the internal battery being fully
charged.
If you have to replace 12V DC power fuse, follow these instructions.
Step 1: Use screwdriver to take the screws out. Remove the rubber bottom
panel rst. Then remove the rear panel.
WARNING: Unplug AC charging adaptor from Portable Power unit before
attempting to replace fuse.
Step 2: You will nd the fuse box shown below.
FUSE REPLACEMENT
SUPPLY 12V
DEVICES
ESTIMATED
WATTAGE
ESTIMATED
RUN TIME
Electric cooler 48 watts 3 hrs
Car vacuums,
Air compressors
80 watts 1.8 hrs
Fuse Box
To Next Page
Loading...
