USER’S MANUAL PAGE 8SBC-125
1. This product is designed for charging all types of 6V lead-acid and 12V
lead-acid batteries, including WET (Flooded), MF (Maintenance-Free),
EFB (Enhanced Flooded Battery), GEL, AGM (Absorbed Glass Mat)
batteries.
2. Built-in intelligent microprocessor makes charging faster, easier and
safer.
3. This charger has safety features, including spark proof, protection for
reverse polarity, short circuit, overheat, overcharge and overcurrent.
4. Charging start-up threshold is 1V.
5. During maintaining process, the output current is 0.5A for 1S, 1.5A for
1S, 0.5A for 1S, 1.5A for 1S (PULSE)......Repeat.
6. The charger has a clamp storage panel on the back.
To Next Page
Loading...
