USER’S MANUAL PAGE 9SBC-125
CHARGER TECHNICAL SPECIFICATIONS
AC Input 120VAC,60Hz, 7.5A MAXIMUM CONTINUOUS,
21.5A MAXIMUM INTERMITTENT.
DC Output Charge: 6/12VDC, 2A-120 SECONDS,
6A-60 SECONDS.
Boost: 6/12VDC, 15A-120SECONDS, 40A-40SEC-
ONDS.
Engine Start: 12VDC, 125A INTERMITTENT 5
SECONDS ON, 180 SECONDS OFF.
Temperature Controlled
Charger Type 4 step, Fully automatic charging cycle
Start Voltage > 1V
Housing Protection IP20
Battery Type All Types of 6V and 12V Lead-acid Batteries
Battery Capacity All Types of 6V and 12V Lead-acid Batteries
Accessories
Included
Clamp Connectors
Ambient
Temperature
32˚F – 104˚F (0˚C – 40˚C)
DISPLAY MESSAGES
Startup – Display screen and all LEDs illuminate for 0.5 second.
“SMARTECH” text will scroll across the display twice followed by
“NO CONNECT” text (if nothing is connected to the charger).
TESTING is shown on digital screen, battery voltage shows (meanwhile
battery VOLTAGE LED is lit).
To Next Page
Loading...
