USER’S MANUAL PAGE 31TECH-5000P
9. When the desired pressure is reached, the air pump will stop
working as it has pre-set function. When the desired pressure
is reached, the reading may have a +/- 1.5PSI difference. (This
is normal)
10. After use, loosen the hose and remove from the air pump.
WARNING: the hose will be very hot after use. Remove
carefully.
11. When not in use, adaptors provided with the air pump can be
placed in the storage area on the top of the tool.
12. WARNING: Improperly attached hoses or accessories can
become detached under pressure and cause serious injury.
Possible air leaks can cause faulty pressure readings. Make
sure all connections are tightly secured.
13. NOTE: Maximum PSI for this unit is 150 PSI
14. NOTICE: Always leave the hose free of obstructions when
the tool is not in use. Overheating could occur if the hose is
blocked.
To Next Page
Loading...