smartmi P1 Quick Start Guide

Smartmi Air Purifier P1 Quick Start
Guide
1.
Downloading the
Smartmi Link App
2.
Connecting the Air Purifier to a Wi-Fi Network
Using your Android/iOS Smartphone
Method
①：
Download the app either by searching
for "Smartmi Link" in the App Store or
Google Play, or by scanning the QR code
below.
Notes:
To use the Smartmi Link app, your phone must
be running iOS 13.0 (or later) or Android 7.0
(or later).
The app's screen format and size may vary
due to updates. Please follow the instructions
on the app.
This product does not currently support 5 GHz
Wi-Fi. Please use 2.4 GHz Wi-Fi.
1
Connect the smartphone to a Wi-Fi
network, then turn on Bluetooth and
open the Smartmi Link app.
2
Tap the
[
+
]
icon in the center of
the screen or the one in the top
right corner of the screen. Select the
product to be connected from the
list of Smartmi products displayed.
3
Reset the device as prompted on
the screen and then tap Next.
4
Select the Wi-Fi network on which
the device will operate. Enter the
password and then tap Next.
5
The air purifier will then be
connected to the Wi-Fi network.

smartmi P1 Specifications

General

Filter Type	HEPA + Activated Carbon
Connectivity	Wi-Fi, Bluetooth
Particle Sensor	Yes
Smart Features	App Control, Voice Control
Control Method	Touch control, App control, Voice control
CADR	250 m³/h
Applicable Area	Living Room, Bedroom, Office