smartmicro UMRR-0C Type 42 - General Performance Data

CONFIDENTIAL AND PROPRIETARY
The Information contained in this document shall remain the sole exclusive property of s.m.s, smart microwave sensors GmbH and shall not
be disclosed by the recipient to third parties without prior consent of s.m.s, smart microwave sensors GmbH in writing.
UMRR-0C Type 42 User Manual USA-Canada_100MHz.docx Version 2 I Page 6 of 19 I November 22, 2017
4.3 General Performance Data
After power up or reset, the sensor readings are within specified performance within <30
seconds. In Table 1: General performance data are given.
Table 1: General performance data
Environmental
Ambient Temperature
-40 ... +74
degree C
Shock
100
g
rms
Vibration
14
g
rms
IP
67
Pressure / Transport altitude
0…10.000
m
Mechanical
Weight
1340
g
Dimensions
See 5.2
Housing Identification
07
Antenna Identification
2A
DSP Board Identification
0C
General
Power Supply
13 ... 32
I
11.8
V DC
W
Frequency Band
24.075…24.175
GHz
Bandwidth
< 100
MHz
Max. Transmit Power (EIRP)
20.0
dBm
Interfaces
CAN V2.0b (passive)
II
RS485 half or full duplex
10/100 Ethernet
Connector
12 Pin plug Hirose LF10WBRB-
12PD
CAN, Power,
RS485, Eth.
I
measured at connector
II
Also available: Relay contacts, see interfaces. It is recommended to use an external surge protection for
power, CAN, RS485, Ethernet and other interface ports.