During a call, a short press of the earbud MFB one time hangs up
the call. Then, a tone indicating ‘Call Ended’ is heard in the earbud.
In connected standby status, double-click MFB of
the left-channel earbud once, and a prompt tone indicating ‘Re-Dialing’ is
heard in the earbud. At this time, click MFB, and the call can be cancelled,
and a prompt tone indicating ‘Call Cancelled’ is heard in the earbud.
After successful pairing between ‘L’ and ‘R’
earbuds for the first time. Just open either one of the headphones till the
blue light and the red light flash alternatively. At this time, double press
MFB and the red light flash 3 times.
After the earbuds are powered on, they are automatically reconnected to
the last paired two devices.
When listening to the music, click MFB of the right or left earbud.
When a call comes in, a long press to the earbud MFB rejects
the call. A tone indicating ‘Call rejected’ rings upon button release is heard
in the earbud.
During a call, a long press of the left earbud MFB will
transfer the audio from the earbud to the smartphone. A tone ‘Du’ sounds
upon button release. Repeat the operation to switch the audios between the
phone and the earbud.
During a call, double-click the MFB of the left-channel
earbud. A prompt tone indicating ‘Mute On’ is heard in the earbud. Repeat
the operation, and a prompt tone indicating ‘Mute Off’ is heard in the
earbud.
When a call comes in, a prompt tone indicating ‘Incoming
call, 1, 2, 3, 4...’ is heard in the earbud, Click MFB of the left-channel earbud
or right-channel earbud once to answer the call.
To Next Page
Loading...