SmartPool PoolEye PE22 User Manual

®
PE22 OPERATION MANUAL
Important.....................................................................2
Alarm Placement ........................................................3
Pool Side Alarm Transmitter Assembly.......................4
Battery Installation ......................................................4
Low Battery Indicator ..................................................4
Pool Side Alarm Mounting, Ladder Mount ..................5
Pool Side Alarm Mounting, Deck Mount .....................6
Turn The Unit ON........................................................8
Turn The Unit OFF......................................................8
Reset The Unit After Alarm Sounds ............................9
Sensitivity Adjustment...............................................10
Alarm Unit Function Test ...........................................11
PIR (Passive infra Red) Sensor................................12
PIR Detection............................................................13
PIR Sensitivity Adjustment........................................13
Reset The PIR ..........................................................13
Safety Mode---Regular .............................................14
Safety Mode---Enhance............................................14
RF (radio frequency) Signal Link Testing..................15
Transmitter Channel A/B Select................................15
Remote Receiver ......................................................16
LED Indication ..........................................................16
Receiver Channel A/B Select....................................17
Language Select.......................................................17
Speaker Volume .......................................................17
Back Up Power .........................................................17
How To Connect To Your Home Security System .....18
Trouble Shooting.......................................................18
Winterizing ................................................................19
Warranty ...................................................................20

SmartPool PoolEye PE22 Specifications

General

Brand	SmartPool
Model	PoolEye PE22
Category	Security System
Language	English

Summary

Important Safety Information

Pool Side Alarm Transmitter Assembly

Battery Installation

Instructions for installing batteries into the pool side alarm transmitter unit.

Low Battery Indicator

Information on how the transmitter and receiver indicate low battery status.

Pool Side Alarm Mounting

Ladder Mounting

Details on mounting the alarm unit onto a pool ladder using provided clamps and adaptors.

Deck Mounting

Instructions for mounting the alarm unit onto a pool deck using a metal bracket and clamps.

Sensor Placement and Deflector

Guidance on sensor orientation, placement near water returns, and using a deflector cap.

Operating the Unit

Turn Unit ON

Procedure for powering on the pool alarm transmitter unit.

Turn Unit OFF

Procedure for powering down the pool alarm transmitter unit.

Resetting the Unit

Instant Reset

Method for immediate reset of the alarm unit after it has sounded.

Delay Reset

Method for a delayed reset of the alarm unit, allowing a 3-minute grace period.

Sensitivity Adjustment

Sensor Position

Adjusting the sensor's sensitivity by changing the position of the adjust piece.

Depth of Immersion

How the sensor's depth in the water affects its sensitivity.

Alarm Unit Function Test

PIR Sensor Functionality

PIR Detection

Explanation of how the PIR sensor detects temperature differences for intruder detection.

PIR Sensitivity Adjustment

How to adjust the sensitivity of the PIR sensor using the switch.

Reset the PIR

Procedure for resetting the PIR sensor after it is triggered.

Delay Reset for PIR

Setting a 3-minute delay for the PIR sensor after triggering.

Safety Mode Settings

Regular Safety Mode

Allows PIR and water motion sensors to operate separately.

Enhanced Safety Mode

Provides multi-level protection by linking PIR and water motion sensors.

RF Signal Link Testing

Transmitter Channel A/B Select

How to select channel A or B for the transmitter to avoid interference.

Remote Receiver Operation

LED Indication

Explanation of the different LED indications on the remote receiver.

Remote Receiver Configuration

Receiver Channel A/B Select

Instructions for selecting the RF channel (A or B) for the receiver.

Language Select

Options for selecting the receiver's display language.

Speaker Volume

How to adjust the loudness of the receiver's speaker.

Back Up Power

Information on installing and maintaining the 9V backup battery.

Connecting to Home Security System

Trouble Shooting: Wave Detection Issues

Trouble Shooting: Common Issues

Frequent False Alarms

Troubleshooting steps for the alarm unit producing frequent false alarms.

PIR Sensor Motion Detection Failure

Resolving issues where the PIR sensor fails to detect object motion.

Alarm Siren Control Problems

Fixing problems with silencing the poolside alarm unit siren.

Receiver RF Signal Issues

Steps to take when the receiver fails to detect RF alarm signals.

WINTERIZING

SIX MONTH LIMITED WARRANTY