12. SAFETY INFORMATION
13. SAFE HANDLING / MAINTENANCE
12. SAFETY INFORMATION
SPO-I uses UV LEDs that radiate UV light during operations. Since UV light can be harmful to
eyes, do NOT look directly into the UV light, even though an optical instrument. In the case of
the light reflection, UV protective glasses are required to use in order to avoid damage by the
light. A proper way of using the tester is not harmful to eyes and skin.
13.1) Avoid exposing the SPO-I to dusty and moist places. This tester contains precise
electrical circuits, so never attempt to open anything of the sealed parts
13.2) If the SPO-I and its Power bank are not going to be used for an extended amount of
time, they should keep on its proper place.
44
To Next Page
Loading...