Smartspeaker A1 - Table of Contents

Table of Contents
Contents Page
Introduction 4
Getting to Know Your SmartSpeaker 5
Setting up CONNECTED Mode – iOS Devices 6
Setting up CONNECTED Mode – Any Device 7
Setting up Wi-Fi DIRECT Mode 8
Using Your SmartSpeaker
9
Using More Than One SmartSpeaker
10
Firmware Upgrade Procedure 11
System Reset 12
Troubleshooting Guide 12
Looking After Your SmartSpeaker 14
This Manual Contains instructions for both the Portable Wireless SmartSpeaker (A1) and the Wireless
SmartSpeaker (A2). The majority of these instructions apply to both models, however some sections
apply only to the Portable Wireless SmartSpeaker (A1). These sections are highlighted with an
orange background.
The major difference between the models is that the Portable Wireless SmartSpeaker (A1) includes a
rechargeable battery, whilst the Wireless SmartSpeaker (A2) is mains only.
References to the rechargeable battery in sections which otherwise apply to both speakers are marked
with an asterisk to indicate that the reference does not apply to the Wireless SmartSpeaker (A2),
which doesn't include the battery.
The Portable Wireless SmartSpeaker (A1) & The Wireless SmartSpeaker (A2)