Need help?Do you have a question about the SmartThings ADT Keychain Remote and is the answer not in the manual?
Ensure the ADT Keychain Remote is within 15 feet of the ADT Security Hub during setup and the hub is disarmed.
Navigate the SmartThings app to add the ADT Keychain Remote as a new device by selecting "Add a Thing."
Press and hold the "Disarm" and "Away" buttons on the remote for 5 seconds to enter pairing mode.
Use the SmartThings app to scan the remote's QR code and follow on-screen instructions to complete setup.
Remove the QR code from the remote and keep it for future reference.
Test arming (Away) and disarming (Disarm) functions by pressing buttons for 2 seconds each.
Test arming the system in Stay Mode by pressing the "Stay" button for 2 seconds.
Test the panic alert function by pressing the "*" and "Stay" buttons simultaneously for 3 seconds.
Reset the remote to factory settings by holding all four buttons for 5 seconds until the LED blinks.
Use a coin to twist open the remote cover, replace the CR2450 battery, and secure the cover.
Arm, disarm, or send panic alerts to your ADT security system with the keychain remote.
Use the remote to arm with professional monitoring or disarm and control home lights upon arrival.
Arm to adjust thermostats or disarm to activate speakers upon returning home.
The remote works with various SmartThings devices like lights, cameras, locks, and thermostats.
Read and follow all safety instructions regarding installation, usage, and environmental conditions.
Understand the manufacturer's limitations regarding product performance, insurance, and potential failures.
Information on FCC certifications, operating frequencies, and compliance statements for the device.
Details on FCC compliance, proper battery handling, and disposal of electronic waste.
Information on the one-year limited warranty, including coverage, exclusions, and obtaining service.
Licensing details for free and open-source software used within the SmartThings ecosystem.
Ensure the ADT Keychain Remote is within 15 feet of the ADT Security Hub during setup and the hub is disarmed.
Navigate the SmartThings app to add the ADT Keychain Remote as a new device by selecting "Add a Thing."
Press and hold the "Disarm" and "Away" buttons on the remote for 5 seconds to enter pairing mode.
Use the SmartThings app to scan the remote's QR code and follow on-screen instructions to complete setup.
Remove the QR code from the remote and keep it for future reference.
Test arming (Away) and disarming (Disarm) functions by pressing buttons for 2 seconds each.
Test arming the system in Stay Mode by pressing the "Stay" button for 2 seconds.
Test the panic alert function by pressing the "*" and "Stay" buttons simultaneously for 3 seconds.
Reset the remote to factory settings by holding all four buttons for 5 seconds until the LED blinks.
Use a coin to twist open the remote cover, replace the CR2450 battery, and secure the cover.
Arm, disarm, or send panic alerts to your ADT security system with the keychain remote.
Use the remote to arm with professional monitoring or disarm and control home lights upon arrival.
Arm to adjust thermostats or disarm to activate speakers upon returning home.
The remote works with various SmartThings devices like lights, cameras, locks, and thermostats.
Read and follow all safety instructions regarding installation, usage, and environmental conditions.
Understand the manufacturer's limitations regarding product performance, insurance, and potential failures.
Information on FCC certifications, operating frequencies, and compliance statements for the device.
Details on FCC compliance, proper battery handling, and disposal of electronic waste.
Information on the one-year limited warranty, including coverage, exclusions, and obtaining service.
Licensing details for free and open-source software used within the SmartThings ecosystem.
General| Brand | SmartThings |
|---|---|
| Model | ADT Keychain Remote |
| Category | Security System |
| Connectivity | Zigbee |
| Operating Frequency | 2.4 GHz |
| Battery Type | CR2032 |
| Buttons | 4 |
| Functions | Arm, Disarm, Panic, Home |
| Compatibility | SmartThings Hub |
To Next Page