SmartThings ADT Home Security Starter Kit

Need help?

Do you have a question about the SmartThings ADT Home Security Starter Kit and is the answer not in the manual?

Summary

Setup ADT Security Hub

Place ADT Security Hub

Connect Power and Wi-Fi

Connect the hub to a power outlet and follow on-screen instructions to connect to your Wi-Fi network.

Download App and Create Account

Download the SmartThings app, create an account, and enter the activation code from the hub.

Change Master User Code

Change the default Master User Code (1111) via the hub's System Settings for security.

Install Power Plug Retaining Bracket

Setup ADT Door and Window Detectors

Detector Purpose and Placement

Scan Detector QR Code

Use the SmartThings app to scan the detector's QR code to complete setup.

Mounting Detectors on Doors

Mounting Detectors on Windows

Align Detector and Magnet

Setup ADT Motion Detector

Motion Detector Placement

Place the motion detector in high-traffic areas within a 30-foot range of the hub.

Scan Motion Detector QR Code

Use the SmartThings app to scan the detector's front QR code for setup.

Mounting Height and Location

Optimizing Detector Aim

Complete a Walk Test

Perform Walk Test

Conduct a walk test after setup to ensure all detectors are working correctly.

System Settings and Sensor Test

Console Test and Exit

Troubleshooting

Reset Door and Window Detector

Reset the detector by pressing and releasing the button twice, then holding it to blink the LED.

Reset Motion Detector

Reset the motion detector by removing the back, pressing the Tamper Switch, and holding it to blink the LED.