Figure 4.8 Video Blind
To set: refer to Chapter 4.3.1 Motion Detection.
4.3.3 Video Loss
When DVR is unable to receive a channel video signal, it will activate the video loss alarm and
coordinate functions.
Note: Advanced key is the same as the right mouse button.
Figure 4.9 Video Loss
To set: refer to Chapter 4.3.1 Motion Detection.
4.3.4 Abnormality
Analyze and test certain hardware and software in current system. When detecting exceptional events,
the unit makes corresponding responses such as screen prompt, buzzer beep, etc.
Page 35
To Next Page
Loading...
