TROUBLE SHOOTING
CHECKING Practices:
Does the OzzyMat clog up and cause the fluid to pool up in the sink? If the fluid is
backing up in the sink and not draining through the OzzyMat properly, there will be increased
evaporation and the low fluid light may come on prematurely because the fluid is in the sink,
not in the base.
How many operators and how many hours a day are you using the SmartWasher? This
will help you determine if they have high, normal or low usage. If you have higher than normal
usage, you will have higher fluid usage.
How often, how much and when are you adding fluid? A full container of OzzyJuice should
be added immediately when the “Add Fluid Light” comes on. The system is designed to warn
users at the point at which fluid should be added. Please keep in mind that the light will remain
illuminated while fluid is low, and more fluid will be needed to reach the proper operating level.
When did you notice the change in usage? If fluid usage has been fine for a period of time
and usage has just recently increased, check to see if anything has changed recently. (New
employees, more employees, more parts being cleaned, longer hours of use, etc.)
How many hours a day do you have the pump running? The more the pump runs, the
more evaporation occurs. Never leave the pump running when the SmartWasher is not in use.
Are operators squeezing the excessive fluid out of the OzzyMat into the sink after
installing a new OzzyMat? When changing out the old OzzyMat, squeeze out any excessive
fluid.
Check the following:ISSUE - Low or No Fluid from Brush/Nozzle
Make sure SmartWasher is not low on fluid.
Hoses from the pump to the nozzle and brush could be clogged, pinched or disconnected.
Check the hoses from the pump to the nozzle making sure they are in working order.
Make sure that the valves at the base of the nozzle and brush are open. If a stronger flow
through either device is needed, turn the valve on the unused tool to the closed position.
The pump comes with a one year factory warranty. If the pump is faulty, call your local distribu-
tor or ChemFree Technical Support to order your warranty replacement. Have the serial
number of the SmartWasher unit available when calling.
Hose connections should be secure and not leaking.
ChemFree Corporation
8 Meca Way, Norcross, GA 30093
CONTACT CUSTOMER SERVICE
www.chemfree.com
800-521-7182
770-564-5533 (F)770-564-5580 (P)
U.S.A.
CHANGE THE OZZYMAT
™
To maintain the effectiveness and performance of the
OzzyJuice change the OzzyMat once a month.
You may be able to dispose of your used OzzyMat as solid waste or with your other absorbent mats.
CHECK LOCAL REGULATIONS:
ChemFree Technical Support : 770-564-5580 www.chemfree.com
Change The OzzyMat Every 30 Days To Maintain Cleaning Performance
8
r
®
SmartWashe
Ozzy
®
To Next Page
Loading...