BACK – Configuring Static on Windows XP NEXT – 3 Clicks - Dynamic
SMC Networks EZ 3-Click Installation Wizard
Compatible with Windows 9x/Me/NT/2K/XP
Step 1: Insert the SMC2404WBR CD into your CD-ROM Drive.
Step 2: The EZ 3-Click Installation Wizard will auto-run. Choose the “Router
Setup” option to begin configuring the router for Internet access.
Figure 1.0
Cable Connection
Step 3: Choose your specific WAN type. The Barricade Turbo Wireless
Cable/DSL Broadband Router supports Cable/DSL. If you subscribe to a DSL
connection, then normally you are using Point-to-Point Protocol over Ethernet
(PPPoE) connection to get online. If you have a dynamic connection, then most
likely you are using a Cable modem connection.
To Next Page
Loading...
