BACK – Advanced Settings - DMZ NEXT – Troubleshooting - Main Page
Advanced Settings - Miscellaneous
Administrator Idle Time-Out: Allows you to set the specified time of inactivity which will command
the router to automatically log out the administrator.
Figure 1.0
Remote Management
Remote management allows you to log into your
router from a remote location. By default, it is set to
0.0.0.0 which would allow any computer on the
WAN side to log into the router
If specified to 24.45.34.12 for example, only a
machine with that specific public IP will be able to
remotely administer the router
To remotely administrate the router: 1) Open a web
browser and 2) Type http://WAN_IP:8080 in the
address bar
To Next Page
Loading...
