SMC Networks EX600-ED Series - Page 59

-59-
No. DOC1045423
■Analogue input unit parameters (continued)
No.
Parameter
Definition
Item
Content
Default
setting
Parameter
setting range
8
Monitor lower
limit
Generates error
when the input
value falls below
the user setting
value.
Enable
Generates an error.
1
Channel
Disable
Does not generate an
error.

Scale setting
value lower
limit
(Only for AXB)
Sets the scale
lower limit.
Generates error
when the input
value falls below
the lower limit.
Enable
Generates an error.
Value: -32767 to 32766
Disable
Does not generate an
error.
Value: -32767 to 32766

Value: 0
1: Set value shall be set per analogue input range within settable range in the next table.
When the analogue input range is changed, check the set value, and change it to an appropriate value.