EX500-GAB1-X1
Rockwell⋅Automation PLC
57.6Kbit/sec, 115.2Kbit/sec
230.4Kbit/sec
Gateway (GW) Unit
Input Block
Cables
Gateway type serial transmission system
• Since wiring is "prepackaged" into one multi-connector type cable, wiring work is not only made
easier, but much more accurate.
S Kit can be used by connecting to gateway unit.
S
7
Specifications
How to Order
Model
Applicable PLC
Communication protocol
Communication speed
Rated voltage
Current consumption
Number of inputs/outputs
Number of input/output
branches
Branch cable
Branch cable length
Communication connector
Power connector
Ambient operating
temperature and humidity
Enclosure
Applicable standard
Power supply voltage range
24VDC
200mA or less
Maximum 64 inputs/64 outputs
4 branches (16 inputs/16 outputs per branch)
8-core heavy-duty cable
5m or less (total extension 10m or less)
M12 connector (8-pin, socket)
M12 connector (5-pin, plug)
+5° to +45°C at 35% to 85% RH (no condensation)
IP65
UL, CSA, CE
EX500-GDN1
DeviceNet Release 2.0
125Kbit/sec, 250Kbit/sec
500Kbit/sec
EX500-GPR1
PROFIBUS-DP
9.6, 19.2, 93.75, 187.5, 500Kbit/sec
1.5, 3, 6, 12Mbit/sec
Input and control unit power supply: 24VDC ±10%
Solenoid valve power supply: 24VDC +10%/–5% (with power drop warning at approx. 20V)
∗ Communication cables and communication connectors are sold separately.
EX500 G DN
DN
PR
AB
Communication protocol
DeviceNet
PROFIBUS-DP
Remote I/O (RIO)
Nil
-X1
Applicable GW unit
DeviceNet
PROFIBUS-DP
Remote I/O (RIO)
1
How to Order Input Block
EX500 IE
Nil
-X1
Applicable GW unit
DeviceNet
PROFIBUS-DP
Remote I/O (RIO)
1
1
2
3
4
5
6
Block type
M8 connector, PNP specifications
M8 connector, NPN specifications
M12 connector, PNP specifications
M12 connector, NPN specifications
8-point integrated type, M8 connector, PNP specifications
8-point integrated type, M8 connector, NPN specifications
How to Order Input Manifold
EEX500 IB1
1
8
Stations
1 station
8 stations
Nil
-X1
Applicable GW unit
DeviceNet
PROFIBUS-DP
Remote I/O (RIO)
E8
⋅⋅⋅
⋅⋅⋅
E
T
M
Connector type
M8 connector
M12 connector
M8 and M12 mixed
Input unit specifications
Input block specifications
Applicable sensor
Sensor connector
Number of inputs
Rated voltage
Indication
Insulation
Sensor supply current
Current source type (PNP output)
or
Current sink type (NPN output)
M8 connector (3-pin) or M12 connector (4-pin)
2 inputs/8 inputs (M8 only)
24VDC
Green LED
None
Maximum 30mA/Sensor
How to Order Power Cable with Connector
EX500 AP S050
010
050
Cable length
1m
5m
S
A
Connector specifications
Straight
Angle
How to Order Cable with M12 Connector
EX500 AC SSPS030
003
005
010
030
050
Cable length
0.3m
0.5m
1m
3m
5m
Connector specifications
SSPS
SAPA
Socket side: Straight
Plug side: Straight
Socket side: Angle
Plug side: Angle
Input block specifications
Connection block
Communication connector
Number of connection blocks
Block supply voltage
Block supply current
Current consumption
Short circuit protection
Current source type input block (PNP input block)
or
Current sink type input block (NPN input block)
Operates at 1A Typ. (power supply cut)
GW unit reset by turning power OFF and back ON.
M12 connector (8-pin, plug)
Maximum 8 blocks
24VDC
0.65A maximum
100mA or less (at rated voltage)
∗ With waterproof cap
2
3
4
5
6
7
1
8
1
7
6
5
4
3
2
8
Socket connector
pin arrangement
Plug connector
pin arrangement
Terminal no.
Cable
core wire colors
1 White
2 Brown
3 Green
4 Yellow
5 Gray
6 Pink
7 Blue
1
3
5
7
8 Shield
2
4
6
8
Connections
2
43
5
Socket connector
pin arrangement
1
1
2
3
4
5
White: 24VDC +10%/-5% (solenoid valve power supply)
Black: 24VDC ±10% (input and control power supply)
Brown: 0V (solenoid valve power supply)
Blue: 0V (input and control power supply)
Gray: PE
Terminal no.
Cable
core wire colors
Connections
EX500
Note) When ordering an input block manifold, enter the
Input manifold part no. + Input block part no.
together. The input block, end block and DIN rail
are included in the input manifold.
VQC1000/2000
Kit (Serial Transmission Kit) Decentralized Serial wiring
Conforms to IP67
To Next Page
Loading...
