Smeg A1XCU6 User Manual

Table of Contents
1. IMPORTANT SAFETY INSTRUCTIONS ................................................................................. 4
2. DIMENSIONAL REQUIREMENTS .......................................................................................... 6
2.1 Product dimension ............................................................................................................. 7
3. UNPACKING, MOVING AND PLACING THE RANGE ........................................................... 8
4. WALL FIXING AND ANTI-TIP DEVICE ................................................................................... 9
4.1 Instructions for wall mounting ............................................................................................ 9
4.2 Mounting the rear top upstand ......................................................................................... 11
5. ELECTRICAL CONNECTION ............................................................................................... 12
5.1 US installation only / 3-wire branch circuit ....................................................................... 13
5.2 US installation and canadian installation / 4-wire branch circuit ...................................... 14
NOTE: THIS APPLIANCE MUST BE INSTALLED SOLELY AND EXCLUSIVELY BY A QUALIFIED
TECHNICIAN. ANY TECHNICAL PROCEDURES MUST BE CARRIED OUT BY AN AUTHORIZED
TECHNICIAN.
INSTRUCTIONS FOR THE INSTALLER: these are intended for the qualified engineer who is able to
install, commission and test the appliance
3

Smeg A1XCU6 Specifications

General

Brand	Smeg
Model	A1XCU6
Category	Ranges
Language	English

Summary

1. IMPORTANT SAFETY INSTRUCTIONS

2. DIMENSIONAL REQUIREMENTS

2.1 Product dimension

Details the overall dimensions and location of electrical connection points for the range.

3. UNPACKING, MOVING AND PLACING THE RANGE

4. WALL FIXING AND ANTI-TIP DEVICE

4.1 Instructions for wall mounting

Step-by-step guide for securely attaching the anti-tip brackets to the wall.

4.2 Mounting the rear top upstand

Procedure for attaching the rear top upstand to the range using screws.

5. ELECTRICAL CONNECTION

5.1 US installation only / 3-wire branch circuit

Instructions for connecting the range to a 3-wire branch circuit in US installations.

5.2 US installation and canadian installation / 4-wire branch circuit

Guidelines for connecting the range to a 4-wire branch circuit in US and Canadian installations.