Instructions for the user
34
5.4 Humidified cooking (on some models only)
The humidified programs that the user can modify are included between P01
and P40 apart from program P39. 3 different humidity levels can be set for each
program: H1 (low), H2 (medium) and H3 (high). Each set level has different
intervals between the steam injection cycles: 8’ pause for H1, 5’ for H2 and 2’ for
H3. Humidification cycles can be set and modified only if an oven temperature
higher than 110°C is selected.
The oven chamber can be humidified
during cooking by controlling the relevant
inlet valve: To do this, just keep the “START” button pressed for at least one
second. Releasing the button stops the water from flowing in.
The diagram below represents the humidification cycle.
WARNING: the humidification cycle begins 2 minutes after cooking starts to
allow complete stabilisation of the oven temperature.
To Next Page
Loading...
