EasyManuals Logo

Smeg BCC01 Manual

Smeg BCC01
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
EN - 11
EN
Use
Customisation of the amount of
dispensed Americano drink: the
drink is produced by dispensing
espresso coffee followed by hot
water. To customise this drink,
proceed as with other drinks and
stop dispensing both coffee and,
next, hot water.
Any customization of the drinks
remains saved for future dispensing.
To restore the manufacturer’s settings,
press the keys
(9)
and (20)
simultaneously for at least
3 seconds.
The machine emits a single sound to
signal the restoration of the factory
settings.
Turning off the machine
Check that the drip tray (14) is positioned
correctly.
If there is no water, the machine remains in
the rinse position until the tank is filled.
Press the button (9) , the keys (16), (17),
(18), (19) light up flashing in sequence and
the machine, if it has dispensed at least one
coffee, performs a self-cleaning cycle.
At the end of the self-cleaning cycle, the
machine switches off.
MACHINE SETTINGS
(Fig. C-G)
Through a programming menu it is possible
to set the water hardness and the acoustic
signals.
Activation / deactivation of acoustic
signals
The acoustic signals can be disabled /
enabled by keeping the keys (17) and
(20) pressed for three seconds; the key
(17) flashes three times indicating the
memorization of the setting.
Setting the water hardness
To access the water hardness programming,
press the keys (16) and (20)
simultaneously for at least 3 seconds, the
LEDs (21) , (22) , (23) light
up flashing.
Choose the water hardness, referring to the
following table, pressing the key
(16)
,
the LED relating to the selected hardness
lights up steadily, the others go off
.
Led Hardness
21
Light
22
Medium
23
Hard
To memorize the selected hardness,
press keys (16) and (20)
simultaneously for at least 3 seconds or do
not press any key for 15 seconds.
To prolong the machine operation
and preserve the aroma and taste of
the coffee, it is recommended to use
the Smeg Softener Filter (optional,
not supplied). For installation and
operation, follow the instructions
that accompany the accessory.
Once installed, set the water
hardness level to ‘Light’ following
the instructions in the previous
paragraph.

Other manuals for Smeg BCC01

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Smeg BCC01 and is the answer not in the manual?

Smeg BCC01 Specifications

General IconGeneral
Product typeEspresso machine
Built-in grinderYes
Capacity in cups1 cups
Grinder capacity150 g
Coffee input typeCoffee beans, Ground coffee
Coffee maker typeFully-auto
Country of originChina
Appliance placementCountertop
Water tank capacity1.4 L
Maximum operating pressure19 bar
Reservoir for brewed coffeeCup
AC input voltage220–240 V
AC input frequency50 - 60 Hz
Auto power off after (max)20 min
Package depth265 mm
Package width495 mm
Package height445 mm
Package weight7000 g
Quantity per pack1 pc(s)
Cappuccino makingNo
Control typeButtons
Product colorRed
Housing materialAluminium, Plastic
Pallet weight168000 g
Quantity per pallet24 pc(s)
Pallet GTIN (EAN/UPC)8017709301002
Quantity per pallet layer6 pc(s)
Number of layers per pallet4 pc(s)
Pallet net width800 mm
Pallet net height1900 mm
Pallet net length1200 mm
Pallet net weight120000 g
Weight and Dimensions IconWeight and Dimensions
Depth433 mm
Width180 mm
Height336 mm
Weight5000 g

Related product manuals