Smeg BCC13 User Manual

EN - 11
EN
Coffee grounds container cleaning
(17) and drip tray (18)
Always empty the coffee grounds
container with the appliance
switched on. This is the only way
of resetting the coffee grounds
counter. The counter resets at
least 15 seconds after opening
the various components and LED
(38) ashes.
• Remove the tray (19).
• Remove the grounds container (17) with its
tray (18) by pulling it outwards.
• Empty the coffee grounds from the container
(17).
• Clean the container (17) and the tray (18)
in running water with neutral dish detergent.
• Thoroughly dry components and reassemble
on the machine.
When the grounds container is
emptied, take care to also empty
the drip tray (18) from possible
residues.
It is advised to daily clean the coffee
grounds container (17) adn the drip
tray (18).
It is totally normal to nd water
residues in the tray. Clean and dry.
Cleaning the water tank (5)
• Remove the lid (4) and remove the tank (5)
from the machine using the appropriate
handle.
• Clean the tank (5) in running water with
neutral dish detergent and reassemble it in
the machine.
The presence of lime scale inside
the tank could cause the appliance
to malfunction. Make sure the tank
is always clean and without lime
scale stains.
Milk container cleaning (23)
Clean the supplied milk container in all of its
parts if it has been used for preparation of a
milk drink.
Wash all the components with running water
and neutral detergent or in the dishwasher,
making sure that milk residues do not remain.
Milk system and circuits cleaning
After dispensing of each drink with
milk, the key (35) blinks indicating
that it is necessary to proceed with
a complete cleaning of the milk
circuit.
In the interest of hygiene and to ensure good
operation and good dispensing in the cup,
it is necessary to daily clean the milk system
and circuit if they have been used to prepare
milk-based drinks.
It is possible to proceed with complete
automatic cleaning via the ‘Easy Cleaning’
key or Manual cleaning of the components.
• Manual cleaning of the milk
system components
Manual cleaning of the milk system
(13) and the tube (24) is what
guarantees more thorough cleaning
of the various components.
Wait for the milk system and its
dispenser (13) to cool down before
proceeding with cleaning.
• Remove the milk tube (24).
• Remove the dispenser lid (14), remove the
milk system (13), then dismount the various
parts as shown in Fig. “H”.
Cleaning and maintenance

Smeg BCC13 Specifications

General

Brand	Smeg
Model	BCC13
Category	Coffee Maker
Language	English