3.1 Before first use
1. Remove any labels from the blender and
accessory.
2. Clean the motor base using a damp
cloth.
3. Wash the bottle with hot water and
washing-up liquid or in the dishwasher,
after removing the blade assembly.
4. Dry thoroughly.
3.2 How to use the “Bottle to go”
accessory
1. Prepare the ingredients and put them into
the bottle.
Danger of sudden start-up
• Make sure the blender is unplugged
before fitting or removing the blade
assembly.
To avoid damage to the blender,
the appliance is equipped with a
safety lock system which shuts off
its operation when the jug is
removed. It also features a motor
safety cut-out which trips if the
motor is overloaded.
Warning
• Ensure that the quantity of liquid ingredients
does not exceed 400 ml/1¾ cup.
• Do not exceed the maximum capacity of
600 ml/2½ cups.
To Next Page
Loading...
