4. Turn the bottle over and connect it to the
base of the blender.
5. Select one of the four available speeds
(1 to 4) or one of the two preset
programs (Pulse or Smoothie) and
operate the blender to prepare the
beverage.
For further information on which speed to
set, see section “3.5 Speed setting
suggestions” in the BLF01 blender manual.
Risk of damage to the accessory
• The Ice Crush programme cannot be
used with the “Bottle to go” accessory.
• If you wish to add ice, crush it in the
blender jug, then add this to the bottle.
To Next Page
Loading...
