Smeg CMS4604NX - Page 23

23
EN
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY
ADD PREGROUND COFFEE
PREGROUND MAXIMUM
ONE MEASURING CUP
A LONG coee with pre-ground coee
has been requested
Place pre-ground coee in the funnel (A21) (g.14)
and press to continue and complete
delivery.
FILL BEAN CONTAINER The coee beans have run out. Fill the beans container (A16 - g.12) .
GROUND TOO FINE. ADJUST
GRIND LEVEL 1 CLICK WHILE
IN OPERATION
The grinding is too ne and the coee is
delivered too slowly or not at all.
Repeat coee delivery and turn the grinding adjust-
ment dial (g.11) one click clockwise towards num-
ber 7 while the coee mill is in operation. If after
making at least 2 coees delivery is still too slow,
repeat the correction procedure, turning the grind-
ing adjustment dial another click (par. "Adjusting the
coee mill" ) . If the problem persists, make sure the
water tank (A12) is fully inserted.
If the water softener lter (C4) is present,
an air bubble may have been released
inside the circuit, obstructing delivery.
Insert the hot water/steam spout (C6) in the appli-
ance and deliver a little water until the ow becomes
regular.
SELECT A MILDER TASTE
OR REDUCE PREGROUND
COFFEE QUANTITY
Too much coee has been used.
Select a milder taste by pressing AROMA (B6)
or reduce the quantity of pre-ground coee (maxi-
mum 1 measure).