24
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY
INSERT WATER OUTLET The hot water spout (C6) is not inserted
or is inserted incorrectly
Insert the water spout as far as it will go.
INSERT MILK CONTAINER The milk container (D) is not inserted
correctly.
Insert the milk container as far as it will go
(g.19)
.
INSERT BREWING UNIT After cleaning the infuser (
A19
) has not
been replaced.
Insert the infuser as described in par. "Cleaning the
infuser".
WATER CIRCUIT EMPTY
PRESS OK TO START FILLING
PROCESS
The water circuit is empty
Press and allow water to drain out of the
spout (
C6)
: the ow will stop itself automatically.
If the problem persists, make sure the water tank
(A12) is fully inserted.
To Next Page
Loading...
Need help?
General
