Smeg DCF01 - Auto Start Mode Usage

Use
37
ENEN
AUTO START mode
1. Press the AUTO START button to
start the AUTO START mode: the LED of
the AUTO START button will light up
and the hours and minutes of the set start
time for brewing the coffee will flash for a
few seconds on the display. Then the
current time will then be displayed.
2. Press the AROMA button to select
the intensity of the coffee required for the
AUTO START mode. If necessary,
depending on the quantity to be brewed
in AUTO START mode, press the 4
CUPS function button to memorise
the function.
3. The appliance remains in AUTO START
mode until the pre-set time is reached,
which is confirmed by a beep.
4. At the set time, the appliance switches to
BREW mode to brew the coffee
according to the chosen settings.
5. Press the AUTO START button at
any time to exit from the AUTO START
mode: the appliance emits a beep and
reverts to the CLOCK mode.