User instructions
1.2 Washing programs
The dishwasher is equipped with a control panel, described in chapter
"1. Description of the controls", from which it is possible to carry out all
the power switch-on, switch-off and programming operations.
Before starting a washing program make sure that:
• The water supply tap is
open.
• The
correct amount of detergent
has been added to the
dispenser
.
• The baskets have been
correctly loaded.
• The spray arms are able to
rotate freely
and without
obstruction.
• The dishwasher door is
securely closed
.
LIGHTING
When the
ON/OFF
button
(1)
is pressed, the dishwasher switches on
and the light
(3)
comes on. About
2 seconds
later, the
PHASES/PROGRAM
lights
(7)
will come on.
PROGRAMMING
In this model of dishwasher, all programming procedures can only be
carried out with the
door closed
. As long as the door is open, the
PROGRAMS
lights
(4)
and
PHASES/PROGRAM
lights
(7)
will remain
off.
SELECTION PROGRAM
The program selection is possible
through the relative buttons
(2)
.
When the button relating to the program required is pressed, the relative
light will come on to confirm the operation.
To Next Page
Loading...
