Istruzioni per l’utente
26
4 Operating instructions
After having installed the dishwasher, remove the basket retainers and
prepare the machine for use as follows:
Regulate the water softening system;
Add regenerating salt;
Add rinse aid and detergent.
4.1 Setting the water hardness
The dishwasher must be switched on and the door closed.
Press and hold the program selection button (7) until the water
hardness adjustment indicator light flashes.
The program indicator lights (8) will indicate the current setting.
Each press of the program selection button (7) modifies the setting
according to the following table.
>
After carrying out the adjustment or displaying the current setting, if you
do not touch the button for a few seconds the dishwasher will
automatically exit from adjustment mode and return to the standard
operating mode.
To Next Page
Loading...
