Smeg DOSC36X - Page 20

Instructions for the user
66
7.2.3 Cooking duration
This function allows a cooking operation to be started and then stopped after a
specific length of time set by the user.
To set the cooking duration, proceed as follows:
• Rotate the oven thermostat knob to the desired temperature
• Rotate the oven function knob to the desired function
• Press . On the display the digits will be shown;
• Press the value modification buttons or to increase or decrease the
setting by one minute for each pressure until reaching the desired time;
• Wait about 5 seconds without pushing any buttons to start the function;
• The current time, the A symbol and the symbol will be shown on the
display;
• Press to view the remaining time;
• At the end of the time the timer will switch off the oven heating elements and
the buzzer will sound. The A symbol will flash and the symbol will
disappear;
• To silence the buzzer, press and proceed with manually switching off
the oven if a cooking operation is in progress.
Warning: it is not possible to set cooking durations of more than 10 hours.
The set programming can be reset by pressing . By doing this the set
duration will be cancelled and the oven must be turned off manually if a cooking
operation is in progress.